Hyco MS6BK 6L 2.84kW Black Wall Mounted Boiling Water Heater

The Hyco MS6BK is a 6 litre wall-mounted boiling water heater from the Microboil Wall range. It supplies instant boiling water for tea, coffee and other hot drinks, with a two-way tap for precise cup filling or a lock-on position for larger vessels.

Smart technology learns and predicts usage so the heater is ready when boiling water is needed and can sleep during quiet periods. It is intended for workplaces and similar commercial settings, including new installations and replacements within the Microboil range.

The black metal case houses a stainless steel tank and a 2.84 kW incoloy-sheathed element. The unit is designed and assembled in the UK and carries CE, UKCA and WRAS approvals.

Key Features

• 6 litre wall-mounted boiling water heater in black
• 2.84 kW incoloy-sheathed heating element
• Smart technology learns usage and can enter sleep mode
• Stainless steel tank for drinking water
• Initial draw-off of 36 cups or 24 mugs
• 12 minute heat-up time from a cold start
• Recovery of 176 cups or 117 mugs per hour
• Two-way tap with lock-on for larger vessels
• Status ring shows heating (red) or ready (green)
• Designed and assembled in the UK

Benefits

• Provides instant boiling water for hot drinks without a kettle
• Cuts standby energy use by learning when boiling water is needed
• High recovery rate suits busy commercial premises
• Electronics keep hot water available while the tank refills after heavy use
• Autocalibration maintains boiling performance for the site conditions
• Two-way tap allows controlled cup filling or continuous flow for cafetières
• Movable 15 mm inlet and vent connections help retrofit existing pipework
• WRAS approved for connection to the wholesome water supply
• 1 year on-site warranty as standard, with 2 year parts cover

Technical Specifications

• MPN: MS6BK
• Capacity: 6 litres
• Power: 2.84 kW
• Heat-up time: 12 minutes
• Initial draw-off: 36 cups / 24 mugs (167 ml cup / 250 ml mug)
• Dimensions (H x W x D): 490 x 323 x 228 mm (depth excludes tap)
• Weight empty: 9.9 kg
• Weight full: 16.4 kg
• Finish: Black
• Outer casing: Steel/stainless steel
• Water tank: Stainless steel
• Heating element: 2.84 kW incoloy-sheathed
• Insulation: Moulded EPP (expanded polypropylene)
• Voltage: 230 V~
• Frequency: 50 Hz
• Water pressure: 1–10 bar
• Ambient operating temperature: 5–30 °C
• Water connection: 2 x 15 mm compression
• Supply cable: 1.5 m pre-wired
• Electrical connection: 13 A switched fused spur
• IP rating: IPX0
• Approvals: CE, UKCA, WRAS
• Warranty: 1 year on-site; 2 year parts

What’s in the Box?

• 1 x Hyco MS6BK Microboil Wall boiling water heater with 1.5 m pre-wired cable
• 1 x tap, supplied for fitting during installation