Gledhill PLTIN120PPSR 120L Platinum Indirect System Ready Unvented Cylinder

The Gledhill PLTIN120PPSR is a Platinum Indirect System Ready unvented hot water cylinder with internal expansion, pre-plumbed and pre-wired for one heating zone and domestic hot water. Manufactured from high-specification duplex stainless steel with high-density HCFC-free Envirofoam insulation, it delivers efficient mains-pressure performance for modern UK homes.

Ideal for trade installers replacing or installing new system-boiler setups, the factory-fitted components reduce on-site time and errors. It suits properties with up to two bathrooms and comes with a 25-year warranty.

Key Features

• Pre-plumbed and pre-wired for system boiler with one heating zone
• Internal expansion eliminates external vessel
• High-efficiency corrugated stainless steel coil
• 3kW Incoloy immersion heater for backup
• Lift-up temperature and pressure relief valve
• 90° elbow and drain valve supplied
• Aligned tappings for easy installation
• Factory tested and fully compliant with G3 Building Regulations

Benefits

• ✔ Faster installation with pre-plumbed pipework and wiring
• ✔ Space-saving internal expansion design
• ✔ Rapid heat recovery for reliable hot water supply
• ✔ Low heat loss for energy efficiency
• ✔ Durable duplex stainless steel construction
• ✔ Suitable for sealed or open-vented primary systems
• ✔ 25-year manufacturer warranty with on-site support

Technical Specifications

• MPN: PLTIN120PPSR
• Capacity: 106 litres (109 litres @ 3 bar)
• Height: 931 mm
• Diameter: 550 mm
• Empty weight: 34 kg
• Full weight: 140 kg
• ErP rating: B
• Heat loss: 39 W / 0.94 kWh/24hr
• Heat up time: 24 minutes
• Immersion heaters: 1 x 3 kW Incoloy
• Secondary return: N/A
• Maximum inlet pressure: 12 bar
• Pressure reducing valve: 3 bar
• Maximum working pressure: 5 bar

What’s in the Box?

1 x Gledhill Platinum PLTIN120PPSR System Ready Indirect Unvented Cylinder with factory-fitted pre-plumbed components, 3kW immersion heater, lift-up T&P relief valve, tundish, inlet control group and compression fittings.